Computer Science for IGCSE & O level - Data Transmission (Section 4)
1
Which error detection method is best suited for data transfer over noisy channels?
2
What is the function of a 'repeater' in a network?
Відповідь(B)
To amplify and regenerate signals to extend network range.
3
Which of the following best describes the concept of 'firewall'?
Відповідь(B)
A device that filters network traffic.
4
What best describes the role of a 'hub' in a network?
Відповідь(B)
Connects devices and broadcasts data to all connected devices.
5
In the ARQ process, how are errors detected?
Відповідь(D)
By calculating a checksum on the data before transmission.
6
Which of the following best describes how data is transferred using parallel data transmission?
Відповідь(C)
Data is sent multiple bits at a time over several wires.
7
Which of the following can be applied on both serial and parallel data transmission?
8
In a network, what does the term 'node' typically refer to?
Відповідь(B)
A device that forwards data packets.
9
What does the acronym 'DNS' stand for?
10
What is the primary role of the receiver in an ARQ system?
Відповідь(C)
To acknowledge received data or request retransmission.
11
In the context of a USB connection, what happens when a new device is detected?
Відповідь(C)
The device is automatically recognized and the appropriate device driver software is loaded.
12
If a byte uses even parity, and the byte received is 10110010, what should the parity bit be?
13
What does the 'Presentation Layer' do in the OSI Model?
Відповідь(C)
Formats and encrypts data.
14
What is the difference between even parity and odd parity?
Відповідь(A)
Even parity means the number of 1s in the byte is even; odd parity means the number of 1s in the byte is odd.
15
What is the purpose of the 'session layer' in the OSI model?
Відповідь(B)
To manage connections between applications.
16
In the context of error detection, what is a checksum used for?
Відповідь(B)
To detect errors in the data transmission.
17
What is the difference between simplex and duplex transmission?
Відповідь(A)
Simplex sends data in one direction, duplex in both directions.
18
What advantage does packet switching provide for networks?
Відповідь(B)
More efficient use of network resources.
19
Which of the following statement(s) is/are true regarding Quantum cryptography?
20
Which of the following is an advantage of packet switching?
Відповідь(C)
Can easily re-route data if a line fails.
21
What is the purpose of 'port numbers' in networking?
Відповідь(B)
To uniquely identify an application or service running on a device.
22
What is the purpose of a 'protocol' in networking?
Відповідь(B)
To establish rules for communication between devices.
23
What is the purpose of error detection in data transmission?
Відповідь(C)
To identify transmission errors.
24
What is the key advantage of asymmetric encryption over symmetric encryption?
Відповідь(D)
Key exchange is more secure
25
If the 'hop number' of a packet reaches zero, what action is usually taken?
26
What is the difference between 'static' and 'dynamic' IP addresses?
Відповідь(B)
Static IP addresses are permanent; dynamic IP addresses can change.
27
Which of the following is true about the polarization of the photon?
28
Which error detection method involves adding all the 1s in the payload and storing it as a value in the trailer?
29
Which of the following factors affect data transmission protocol?
30
What is the main purpose of parity checking in data transmission?
Відповідь(B)
To detect errors that may have occurred during transmission.
31
In data transmission, which of the following is NOT a typical method for error detection?
32
In data transmission, what does the term 'Simplex' refer to?
Відповідь(C)
Sending data in only one direction.
33
When using ARQ, if an error is detected, what typically happens?
Відповідь(B)
The receiver sends a NAK to the sender.
34
What is the name of the process of converting the encrypted message back to a readable form?
35
Which of the following is a key benefit of packet switching?
Відповідь(B)
More efficient use of network bandwidth.
36
What does a 'tag number' (hop number) do to the header of a packet?
37
Which technology is specifically based on the use of quantum physics principles?
38
Which data is usually included in an error detection method?
39
Which error-detection method is best suited for identifying burst errors (multiple bits corrupted)?
40
What is the main goal of encryption?
Відповідь(B)
To convert the data into an unreadable format.
41
Which of the following is a form of error detection that makes use of a system of acknowledgements and timeouts?
42
What is a 'subnet mask' used for?
Відповідь(B)
To identify the network portion of an IP address.
43
Which of the following are essential parts of a data packet?
44
What is the role of a "check digit"?
Відповідь(B)
To detect errors in data entry.
45
What is the main advantage of using checksums for error detection over a simple parity check?
Відповідь(A)
Checksums can detect multiple-bit errors more effectively.
46
In the context of data transmission, what does "duplex" refer to?
Відповідь(C)
The ability to send and receive data simultaneously.
47
What does the term 'URL' stand for?
48
Which part of a data transmission system is most vulnerable to errors?
49
What is the purpose of the 'physical layer' in the OSI model?
Відповідь(C)
To define the physical transmission media.
50
Which security threat involves an attacker attempting to guess a password or key through trial and error?
