Computer Science for IGCSE & O level - Hardware (Section 24)

  • 1
    In the context of data transmission speed, what is 'bandwidth' primarily referring to?
    คำตอบ
    (B)
    The maximum rate of data transfer over a network or connection.
  • 2
    Which part of an inkjet printer sprays the ink?
    คำตอบ
    (B)
    The print head.
  • 3
    Which of the following is NOT a function of the Control Unit?
    คำตอบ
    (D)
    Performing arithmetic calculations.
  • 4
    How does an SSD typically store data?
    คำตอบ
    (C)
    In flash memory chips.
  • 5
    Which physical components store data on a traditional hard drive (HDD)?
    คำตอบ
    (C)
    Platters
  • 6
    Which component is responsible for the 'boot-up' instructions in a computer?
    คำตอบ
    (C)
    ROM
  • 7
    In a lighting system with an embedded system, what are the inputs that influence the lighting control?
    คำตอบ
    A
    B
    C
  • 8
    Which of the following is NOT a touch screen technology mentioned?
    คำตอบ
    (D)
    Acoustic
  • 9
    Which of the following is NOT a typical input device?
    คำตอบ
    (C)
    Monitor
  • 10
    In a security system, what type of sensor might be used to detect a broken window?
    คำตอบ
    (A)
    Acoustic sensor
  • 11
    What is converted into electrical signals in a microphone?
    คำตอบ
    (A)
    Sound waves
  • 12
    What is the primary disadvantage associated with the use of virtual memory?
    คำตอบ
    (B)
    Slowdowns due to excessive swapping (thrashing).
  • 13
    Which component of a digital camera processes information from the image sensor?
    คำตอบ
    (D)
    The ADC.
  • 14
    Which of the following is used in the 3D scanning process?
    คำตอบ
    (C)
    Laser light
  • 15
    What is the minimum storage capacity of a dual layer blu-ray disc?
    คำตอบ
    (B)
    50 GB
  • 16
    Which of the following are advantages of using a static IP address?
    คำตอบ
    (A)
    Easier to manage for servers and websites
  • 17
    What component in a loudspeaker generates the magnetic field?
    คำตอบ
    (B)
    The magnet
  • 18
    Which of the following is a feature of the Von Neumann architecture?
    คำตอบ
    (B)
    Instructions and data stored in the same memory space.
  • 19
    In the central heating system example, what does the temperature sensor provide?
    คำตอบ
    (C)
    Data on the current temperature.
  • 20
    What are some disadvantages of static IP addresses?
    คำตอบ
    A
    D
  • 21
    What are some disadvantages of an LCD projector?
    คำตอบ
    (A)
    Lower native contrast ratio than DLP projectors.
  • 22
    In an SSD, which component is responsible for managing the data storage and retrieval on the flash memory?
    คำตอบ
    (C)
    Controller
  • 23
    What are the primary components involved in storing data on an HDD?
    คำตอบ
    (B)
    Platters and read/write heads.
  • 24
    In a digital camera, what happens to the analog electric charges?
    คำตอบ
    (B)
    They are converted to binary information to be stored.
  • 25
    Which of the following best describes 'slicing' in the context of 3D printing?
    คำตอบ
    (B)
    Dividing the 3D model into thin horizontal layers.
  • 26
    What is the difference between twisted pair and fiber optic cables?
    คำตอบ
    (D)
    Twisted pair uses electrical signals, fiber optic uses light signals and is less susceptible to interference.
  • 27
    What component in a modern computer converts a logical address into a physical memory address?
    คำตอบ
    (C)
    Memory Management Unit (MMU)
  • 28
    What is the function of a floating gate in flash memory?
    คำตอบ
    (B)
    To store the charge that represents data.
  • 29
    What is the main risk associated with using cloud storage?
    คำตอบ
    (C)
    Data security concerns
  • 30
    Which of the following is considered primary memory?
    คำตอบ
    B
    C
  • 31
    What is the primary function of the Program Counter (PC)?
    คำตอบ
    (B)
    To hold the address of the next instruction.
  • 32
    In central heating systems, what action is taken if the temperature reading is below the preset value?
    คำตอบ
    (C)
    A signal is sent to the heater.
  • 33
    Which of the following components physically stores data on a traditional HDD?
    คำตอบ
    (C)
    Platters
  • 34
    How does a network interface card (NIC) allow a computer to connect to a network?
    คำตอบ
    (B)
    By assigning a MAC address.
  • 35
    If the barcode is not read, what does the checkout system check for?
    คำตอบ
    (B)
    The product code is entered manually.
  • 36
    What is the main advantage of using fiber optic cables over copper cables?
    คำตอบ
    (C)
    Higher bandwidth and less interference
  • 37
    What are the advantages of using a QR code?
    คำตอบ
    A
    B
  • 38
    In a microphone, what does the electric current output resemble?
    คำตอบ
    (C)
    An analogue signal.
  • 39
    What is the primary function of RAM (Random Access Memory)?
    คำตอบ
    (C)
    To store the data and instructions that the CPU is actively using.
  • 40
    Which of the following best describes a 'word' in a computer system?
    คำตอบ
    (B)
    A group of bits processed as a unit.
  • 41
    What is a disadvantage of capacitive touchscreens?
    คำตอบ
    (C)
    They can be affected by electromagnetic radiation.
  • 42
    What is a disadvantage of a hybrid cloud?
    คำตอบ
    (B)
    It's more expensive to manage and maintain.
  • 43
    Which of the following is a characteristic of OLED technology?
    คำตอบ
    (C)
    Emits its own light
  • 44
    What type of bus transmits control signals within a computer system?
    คำตอบ
    (C)
    Control bus
  • 45
    What is the primary function of the transfer roller in a laser printer?
    คำตอบ
    (B)
    To transfer the toner from the drum to the paper.
  • 46
    How does a resistive touch screen work?
    คำตอบ
    (B)
    Senses the pressure.
  • 47
    In a laser printer, what step occurs immediately after the toner is transferred to the paper?
    คำตอบ
    (B)
    The paper is heated by the fuser.
  • 48
    What type of printing process builds objects layer by layer, using a laser to fuse powdered material?
    คำตอบ
    (C)
    Selective Laser Sintering (SLS)
  • 49
    What type of code is the quick response (QR) code?
    คำตอบ
    (B)
    A 2D barcode.
  • 50
    Which printer technology uses nozzles?
    คำตอบ
    (C)
    Inkjet Printer